| The World's Most Advanced Protective Coatings |
 |
 |
|
 |
 |
 |
  |
CorrosionX
Aviation MSDS |
|
|
|
||||||||||
|
BULK AEROSOL |
 |
|||||
Click
here to download the Manufacturer's
Safety Data Sheet
|
 |
|||||
| PRODUCT DATA (Supplement to PDF File) | ||||||
|
PHYSICAL CHARACTERISTICS |
||||||
| Color Appearance Odor Specific Gravity @ 15.6 C Vicosity, cSt@40C ..............cSt@100C Flash Point c.o.c. Non-toxic |
Brown Clear Fresh Scent 0.880 47.3 7.0 >132C. |
Volume
Solids Film Thickness pH Vapor Pressure @ 38C Solubility in Water Boiling Point Weight per Gallon |
>90% 0.0004" in typ. NA 1mm Hg. Slightly Emulsifiable >200C 7.1 lbs. |
|||
| PERFORMANCE PROPERTIES | ||||||
| Corrosion
Protection: Electrical: Lubrication: |
Salt
Spray, hrs (Fiilm Thinckness) Humidity Cabinet, hrs. Dielectric Strength Anti-Wear |
96 0.19 mils 1320 >39,000V 0.40 mm* |
ASTMB-117 ASTMB-1748 ASTMB-877 ASTMB-4172 |
|||
| *Note: The smaller the number, the better the performance. A standard lubricating oil of the same viscosity would yield a value of 1.0 - 1.2 mm. | ||||||
| Rubber: No visible effect on Buna-N, Viton or Neoprene products. Slight swelling and/or softening of butyl rubber items. | ||||||
| Adhesives & Sealants: Usually no effect but some adhesives may soften and selants with silicone may experience slight swelling. Recommend a small test sample prior to widespread application. | ||||||
| Painted Surfaces: Paints typically used on aircraft, automobiles and machinery are unaffected by CorrosionX. Polishes and some wax coatings may soften by the application of any hydrocarbon product. | ||||||
| Plastics: CorrosionX is compatible with most commonly encountered plastics such as: Acrylic, Polyester, Nylon, Vinyl, Dlrin, Teflon, Forlica, Polyethylene and Polypropylene. Should there be any question when other types of plastics are involved, it is suggested a small sample be tested. | ||||||
| Fabrics: CorrosionX will be absorbed into the fibers of most fabrics, thereby creating slight staining. The stain is not permanent and may be removed with naphtha or mineral spirits. | ||||||
| Storage: Bulk: Store at room temperature (50 F or more). Aerosols not more than 120 F | ||||||
| Shelf Life: Bulk: Indefinite (as long as container remains capped). Aerosols: 3 years | ||||||