Could there be a greater test of a gun lube than the Sea Whiz (Phalanx*) weapon system on a US Navy vessel?

CORROSIONX IS THE ONLY PRODUCT written into the specs!

* Fires 4,500 - 20mm rounds per minute at incoming targets through
a 6 barrel gatling gun.

> Cuts through stubborn bore deposits for easier, more
    thorough cleaning
> Decreases fouling, even after hundreds or thousands of rounds
> Lubricates and protects mechanisms and bores even better and
    longer than products fortified with Teflon*
> Ideal for semiautomatics and automatics
> Sticks to metal like a magnet to prevent rust ... even in the rain

CorrosionX for Guns comes in a 4 oz. (113.4g) plastic bottle, with an applicator tip that's ideal for firearms.
It's easier than ever to apply the product, and get maximum protection and performance.

Polar Bonding is The Key to CorrosionX FOR GUNS' Performance!
Unlike ordinary cleaners, oils and greases, molecules of CorrosionX for Guns stick to metal almost like a magnet.
Swab a dirty bore with CorrosionX for Guns, and it will work its way through fouling to reach the metal, lifting dirt out of the metal for easy removal with a patch. Leave a very light coat of the product all over the weapon; it will prevent rust between uses, and make the weapon even easier to clean next time.

Competitive .22 caliber pistol shooters say that cleaning and lubricating with CorrosionX for Guns increases their time between jams from 200-300 rounds to 1,500 rounds or more.

A major U.S. law enforcement agency reported that a light coat of CorrosionX for Guns in the bore increased muzzle velocity by more than 100 fps, kept barrels noticeably cooler, and it even improved accuracy and consistency. They treat their ammunition, as well as their weapons, with a slightly-dampened patch.

Because CorrosionX for Guns bonds to the metal it contacts, it doesn't 'sling off' semiautomatic and automatic actions, making it an excellent replacement for messy greases.

CorrosionX for Guns is ideal for valuable antique and collectible weapons. It protects them from rust, and it won't hurt metal finishes. In fact, it enhances their appearance, and it won't attract dust or dirt.

It's also a great lubricant and rust preventative for reloading equipment. Very little CorrosionX for Guns is required for effective lubrication. Too much applied to ammunition could disable unsealed primers since CorrosionX is such an extraordinary penetrant.

What The Experts
Have to Say...

This is without a doubt the best metal protectant I've ever used.

Chris Christian
Gunworld Magazine

Here's all of what Dick Metcalf had to say about CorrosionX in his "Worth A Look" column in Shooting Times:

 I sometimes think there are more different kinds of firearms lubes and rust-prevention compounds on the market these days than there are guns. However, I have recently become a believer in one particular item and have begun using it exclusively. The product is CorrosionX.

As a corrosion inhibitor, CorrosionX polar bonds to metal (water beads on it like car wax), prevents rust from starting even with extended exposure to rain, and withstands extreme handling abuse. It repels moisture with the thinnest of coats. I've rubbed hard with a salt-sweaty thumb on a barrel wiped down with CorrosionX and moisture still beads. And its polar-bonding effect works to prevent existing rust from progressing - spray it on a gun where rust specks have already begun, and it'll stop it cold.

As a lubricant, CorrosionX offers a lower coefficient of friction than even PTFE-fortified products ( the Teflon, semi-teflon, and other polymer-bead compounds). Plus, since it's specifically designed for high-temperature(s), it doesn't burn off or sublimate away during hot-action use. I recently used it to lube the yoke/crane cylinder-rotation shafts of two .357 Magnum revolvers during a 10,000-round endurance review, where 500-round strings were standard. CorrosionX worked longer and better than anything I've used before. The cylinder/yoke areas would get too hot to touch, but the lube did not dry up and was visibly still "moist" when I pulled off the cylinder.

As a penetrating agent, CorrosionX is remarkable. The manufacturer reports incidents where its application has freed the frozen actions of guns that have laid for weeks in the soaking ruins of building fires. That's pretty extreme.